Langley Models (Unpainted Kits) Locomotive Body kits

Return to Last Viewed Page (Back)

Shop Front > N Scale (1/148th) Kits > Locomotive Body kits

	G.W.R. 56XX 0-6-2T Loco Body Kit(Reference #B1) (Requires Farish/Bachmann 94XX chassis to complete) see locomotive chassis section. 150 of these engines were built at Swindon plus a further 50 at Armstrong Whitworth. Primarily used for coal traffic these locos also appeared on local passenger trains. Designed by C B Collett and introduced in 1924 Unpainted kit Price: £23.20 / €euro31.32
	Quantity:

	GWR 0-6-0 2251 CLASS LOCO BODY/TENDER KIT(Reference #B2) Requires farish/Bachmann 94xx & Tender underframe ----- Stocked see locomotive & chassis section (tender underframe B3b GWR etched brass tender underframe or Graham Farish GWR tender underframe (limited stock)see Tender section-- Stocked) The class was introduced by C B Collett over a period of years from 1930. They were designed for mixed traffic work. Nb: this kit includes alternative cab sides to enable the war- time version to be portrayed, some ran with a different ten- der, for details see our Loco Accessory list. Unpainted kit Price: £27.00 / €euro36.45
	Quantity:

	NEW G.W.R. Diesel Parcels Railcar Body Kit(Reference #B4a) Requires Grafar (Farish) Diesel Railcar 8179-----Not Stocked (buy 2nd hand). This vehicle was used primarily on Express Parcels between Paddington and Reading General. Re tooled with incresed detail of the Diesel Railcar onto GF railcar chassis Unpainted kit Price: £23.20 / €euro31.32
	Quantity:

	NEW GWR Twin Railcar(Reference #B5) Chassis required Farish original Railcar chassis (wheels and bogies included for other car.) Unpainted kit Price: £36.70 / €euro49.55
	Quantity:

	GWR STEAM RAILMOTOR BODY KIT(Reference #B8) Requires Original Lifelike C420 chassis (buy 2nd hand) The model represents Steam railmotorNo's 17,18 & 25 Withdrawn 1919-20 and converted to non-powered Auto Trailers. (You can use Bachmanns GP50 (stocked) twin ended drive and disconnect one drive to extend the body, not an expensive chassis but you will need care to disconnect drive (NB this will invalidate any warranty Bachmann supply with the unit) Unpainted kit Price: £35.55 / €euro47.99
	Quantity:

	G.W.R. 14XX & 70' PANELLED AUTO COACH BODY KIT(Reference #B9) Required Farish DMU motor bogie 8109 - not stocked (buy 2nd hand) This kit comes complete with wheels for the loco, just need a spare coach bogie to complete for the coach. These vehi- cles regularly ran with the 14XX 0-4-2T loco's or Auto fitted Pannier's (You can use Bachmanns GP50 (stocked) twin ended drive and disconnect one drive to extend the body, not an expensive chassis but you will need care to disconnect drive (NB this will invalidate any warranty Bachmann supply with the unit) Unpainted kit Price: £55.80 / €euro75.33
	Quantity:

	LNER 2-6-4T CLASS L3(L1) BODY KIT(Reference #B10) Requires Farish Prairie 61xx chassis, the later model with 6mm pony wheels to complete) ----- Stocked See Locomotive section 3x axles of pony wheels are included in the kit as replace- ments. Designed by J C Robinson for the Great Central Rail- way and used on heavy coal trains, classed by the LNER as LI they were re classified to L3 after the introduction of Thompson's 2-6-4T class LI Unpainted kit Price: £27.00 / €euro36.45
	Quantity:

	LNER Sentinel Steam Railcar incl. clips Body Kit(Reference #B11) Requires Farish DMU Motor Bogie 8109 (4 wheel power bogie)-----Not Stocked (buy 2nd hand) The majority of these (named after famous stage coaches) ran in the North Eastern section of the LNER up to 1942/3 Unpainted kit Price: £35.55 / €euro47.99
	Quantity:

	LNER B1 4-6-0 TENDER LOCO BODY KIT(Reference #B12) Requires Farish Black 5 & tender chassis-----Stocked see locomotive & chassis section Designed by E Thompson as part of his standardisation pro- posals for the LNER, they were to be found in all areas of the LNER on mixed traffic duties. A number were named. Unpainted kit Price: £27.00 / €euro36.45


	LNER N2 CLASS 0-6-2T LOCO BODY KIT(Reference #B13) Requires Farish Prairie 61xx chassis -----Stocked See Locomotive section These locos were designed by Sir N Gresley for outer suburban duties from Kings Cross, condensing pipe- work is included to portray those so fitted for working the Metropolitan lines, some were transferred to the Eastern sec- tion and some to Scotland. Unpainted kit Price: £23.20 / €euro31.32
	Quantity:

	STREAMLINED LMS 4-6-2 CORONATION KIT(Reference #B14) (Requires Minitrix Brittania Loco and Tender chassis to com- plete) Nb; this kit will only be available for a limited period due to difficulties in obtaining the Minitrix Chassis from this now withdrawn model You can use Farish Duchess but the kit will require adaption ----- Stocked Check Chassis section Unpainted kit Price: £29.35 / €euro39.62
	Quantity:

	LMS (Ex L&Y) STEAM RAILMOTOR BODY KIT(Reference #B15) Requires original Lifelike GP40 or C420 single ended drive chassis -----Not Stocked (buy 2nd hand) (You can use Bachmanns GP50 (stocked) twin ended drive and disconnect one drive to extend the body, not an expensive chassis but you will need care to disconnect drive (NB this will invalidate any warranty Bachmann supply with the unit) These unusual railcars featured a removable locomotive sec- tion to facilitate repair, they were intended for use on short branch lines on the L&Y system Unpainted kit Price: £29.35 / €euro39.62
	Quantity:

	LMS PRINCE of WALES 4-6-2T LOCO BODY KIT(Reference #B16) (Requires an early Grafar 61 XX prarie tank----Stocked See Locomotive section needs 1 x tiny 4.5mm pony wheels to complete nb; (1 set of the pony wheels are supplied on the chassis you will need to acquire an additional axle of the 4.5mm wheels. These locos were built between 1910-16 for the LNWR by C Bowen-Cooke For Express passenger service. They were taken into LMS service at the grouping 1923. Unpainted kit Price: £28.05 / €euro37.87
	Quantity:

	SOUTHERN URIE S15 4-6-0 TENDER LOCO KIT(Reference #B17) (Requires Fleischmann 7160 or 7161 to complete)-----Not Stocked (buy 2nd hand) These locos designed by R W Urie for the LSWR in 1920 were primarily a Freight version of the King Arthur Class, although they were subsequently used on relief Expresses and Boat Trains with great success. This Western section model features the Bogie watercart tender. Unpainted kit Price: £27.00 / €euro36.45
	Quantity:

	SOUTHERN E2 CLASS 0-6-Ot BODY KIT(Reference #B18) Requires farish pannier 94xx chassis ----- Stocked see locomotive section Designed by R Billington for the LB&SCR primarily for shunting and dockside work. The last locos were withdrawn 1961-3 Unpainted kit Price: £21.60 / €euro29.16
	Quantity:

	SOUTHERN Q1 CLASS 0-6-0 TENDER LOCO BODY(Reference #B19) Requires farish 94xx -----Stocked (tender underframe GWR B3b- In stock) or Farish GWR Tender Under frame (in stock - limited) See locomotive chassis section This austerity wartime loco was built by 0 V S Bul- leid for Heavy Freight and occasional Passenger work. They were designed as a short term wartime loco yet were so successful that they lasted to the end of steam, rarely seen in the west country. Brass overlays are also included to portray the distinctive BFB wheels. Unpainted kit Price: £27.00 / €euro36.45
	Quantity:

	SOUTHERN E5 CLASS 0-6-2T LOCO BODY KIT(Reference #B21) Requires farish pannier 94xx chassis -----Stocked see locomotive section Designed by R Billington for the LB&SCR these usefull lo- comotives built primarily for Passenger work were some- times seen performing mixed traffic duties. The last was withdrawn in 1956. Unpainted kit Price: £23.20 / €euro31.32
	Quantity:

	S.R./B.R. Rebuilt Merchant Navy(Reference #B22) Requires Minitrix Britannia chassis-----Not Stocked (buy 2nd hand) Unpainted kit Price: £29.35 / €euro39.62
	Quantity:

	BR STANDARD CLASS 4MT 4-6-0 & BR2 Tender (Reference #B23) Requires chassis- Farish Class 5 & tender chassis-----Stocked see locomotive & chassis section These class 4 Mixed Traffic Locos designed by R Riddles as part of the range ofBR Standard Locos were widely used throughout BR and appeared in both Black mixed traffic livbery and Green Passenger livery. The kit includes 2 x chimneys to enable the modeller to portray either single or double chimney version . A BR2 tender is included in the kit. Those locos allocated to the Southern Region were generally fitted with the largercapacity BRIb tender. This is available as an extra for details see or Loco Accessory list. Unpainted kit Price: £27.00 / €euro36.45
	Quantity:

	BR CLASS 24 DIESEL Bo-Bo(Reference #B24) Requires Farish Class 25 chassis 8309 Not stocked (buy 2nd hand) The Sultzer type 2 (later class 24) was one of the pilot scheme diesels introduced by BR. In the early days they ran on the Southern to cover for late delivery of the class 33 and were seen on all types of duties including double heading steam locos. Subsequently transferred to the Eastern & Mid- land regions they performed many years of service. Unpainted kit Price: £22.60 / €euro30.51
	Quantity:

	BR CLASS 21(29) Bo-Bo DIESEL BODY KIT.(Reference #B25) Requires Farish Class 25 chassis 8309 Not stocked (buy 2nd hand) These locos another of the pilot scheme diesels introduced as class 21 were very troublesome and subsequently a number were re-engined classified class 29 and spent the rest of their days in Scotland well away from London where they started! Unpainted kit Price: £22.60 / €euro30.51
	Quantity:

	BR/SR Class 4 4-6-0 & BR1b tender(Reference #B26) Requires chassis - Farish Class 5-----Stocked see locomotive & chassis section Unpainted kit Price: £27.00 / €euro36.45
	Quantity:

	BR Class 4MT 2-6-0 & BR1b tender(Reference #B27) Requires chassis - farish Crab & tender --- Stocked see locomotive & chassis section These 4MTs were lighter than the 4-6-0 version and ap- peared widely on the Southern region, venturing onto the S&DJR regularly in addition to use elsewhere. The kit is sup- plied with the BR1b tender, those wishing to model the Southern locos can obtain the BR2 tender as an extra, for details see our Loco Accessory List Unpainted kit Price: £27.00 / €euro36.45
	Quantity:

	BR Drewry Diesel Shunter Body Kit(Reference #B31) Requires Minitrix 2034 0-6-0 chassis-----Not Stocked (buy 2nd hand) These useful small shunters (later classified 04 under BR Tops system) found work in Locomotive sheds and works Docks and Street tramways, where their side skirts offered protection to the public. Unpainted kit Price: £23.20 / €euro31.32
	Quantity:

	LMS/BR 7P Pacific Express(Reference #B33) Requires Minitrix Britannia Can fit Farish Dutchess with adaption. Unpainted kit Price: £32.60 / €euro44.01
	Quantity:

	BR STANDARD CLASS 5MT 4-6-0 & BR1 tender(Reference #B36) Requires farish A3 (In stock) & Farish LMS tender underframe LMS1)----N/A See Locomotive chassis section B1a LMS etched brass Tender underframe. as alturnative to the Farish Tender underframe. This highly successful design based on the LMS Black V by R Riddles saw widespread use on BR including the S&DJR where they were highly acclaimed by the crews.The kit is supplied with the BR1 tender. Those wishing to model the Southern allocated locos may if they wish, use the higher capacity BRIb tender available as an extra, for de- tails see our Loco Accessory List Unpainted kit Price: £29.35 / €euro39.62
	Quantity:

	GWR HAWKSWORTH 4-6-0 COUNTY CLASS LOCO BODY/TENDER KIT(Reference #B37) (Requires Farish/Bachmann Hall class chassis to complete) Nb: this kit contains a complete etched brass tender under- frame of the correct pattern (the Hall type is incorrect) This class was the last of a long line of GWR 4-6-0's These strong locos spent most of their lives in Devon and Cornwall 3 Alturnative chimneys supplied. Unpainted kit Price: £40.40 / €euro54.54
	Quantity:

	LNER B2 CLASS 4-6-0 TENDER LOCO BODY KIT(Reference #B38) Rebuilt from the B17 Footballer. (Requires Farish/Bachmann A3 loco chassis to complete) Nb: a complete etched brass tender underframe is included in this kit. These locos were a Thompson re-build of Gresley's famous B17's (the Footballers) and featured Thompsons Al boiler as fitted to his Bl class, with 1 exception they were fit- ted with tenders from the withdrawn C5 class and parts are included in the kit to represent all variants of this tender, also included is a Westinghouse pump for those members of the class so fitted. The Odd man out was 61671 "Royal Sover- eign" (the Royal Engine) and this was fitted with an LNER group standard tender, if you wish to model this engine the tender is available as an extra, for details see our Loco Ac- cessory List. Unpainted kit Price: £40.40 / €euro54.54
	Quantity:

	NEW Southern E2 Extended Tank(Reference #B39) The Billington E2 Tanks were built in two batches of 5 locos the first Batch in 1913 (Langley Kit code B18) LBSC No’s 100-104. Southern No’s 2100-2104. A further 5 were ordered in 1914 (this Kit) LBSC Nos 105-109. Southern Nos 2105-09. Chassis required Farish/Bachmann Pannier 94xx See Locomotive section Unpainted kit Price: £30.15 / €euro40.70
	Quantity:

	NEW GWR 97xx Loco(Reference #B40) A class of 10 locomotives built 1933 based on the 57xx fitted with condensing gear for working on metropolitan lines to smithfield market in London All based at Old Oak Common. Chassis required Farish/Bachmann 3f Jinty Unpainted kit Price: £30.15 / €euro40.70
	Quantity:

	NEW LNER N7/3 Class 0-6-2 Loco(Reference #B41) N7 class was designed by AJ Hill for the Great Eastern Railway in 1915. This model represents the later variant as used on Liverpool St Jazz trains to Chingford & Enfield Town in LNWR and BR (e) period. These powerful locomotives with this 4’10” wheels, superb powers of acceleration, excelled on the intensive stop/start Jazz service and lasted upto electrification of the GE outer surburban services in the 1960’s. The class appeared as far away as Cambridge and some GN areas Chassis required Farish/Bachmann Pannier 94xx See locomotive chassis section Unpainted kit Price: £30.90 / €euro41.72
	Quantity:

	Streamlined A4 Conversion Kit(Reference #BC1) Many parts to convert A4 into the streamlined version(s) Requires Farish A4 loco (use any Bachmann Class 4 Locomotive ) --- Stocked see chassis section) Unpainted kit Price: £12.20 / €euro16.47
	Quantity:

	Rhymney Conversion kit(Reference #BC2) Used to convert GP loco to other versions. Requires Graham Farish General Purpose Tank Loco - not stocked Unpainted kit Price: £12.20 / €euro16.47
	Quantity: