Bulbs,wire,transformers,flashing lights, gearboxes

Flickering Arc Module that is supplied with Red & white LED. Red and white gas cutting or Arc welding simulation.
The flickering speed can be altered. Requires 12volt transformer.

High Quality metal cased high torque Motor/Gearbox unit 12 volts 300 milli amps 44revs per minute. Torque 25N.cm

High Quality metal cased high torque Motor/Gearbox unit 12 volts 300 milli amps 36 revs per minute. Metal Case Torque 25N.cm

High Quality metal cased high torque Motor/Gearbox unit 6 volts 240 milli amps 18 revs per minute. Torque 20ncm

High Quality metal cased high torque Motor/Gearbox unit 6 volts 240milli amps 22 revs per minute. Torque 20ncm

10 meter Roll of 7 strands 0.2mm core wire. 1.4 amps

10 meter Roll of 7 strands 0.2mm core wire. 1.4 amps

10 meter Roll of 7 strands 0.2mm core wire. 1.4 amps

10 meter Roll of 7 strands 0.2mm core wire. 1.4 amps

10 meter Roll of 7 strands 0.2mm core wire. 1.4 amps

10 meter Roll of 7 strands 0.2mm core wire. 1.4 amps

10 meter Roll of 7 strands 0.2mm core wire. 1.4 amps

10 meter Roll of 7 strands 0.2mm core wire. 1.4 amps

Transformer which converts 240volts AC to 9volts AC. Sold as 'spares' so will require boxing in wood / plastic or under the layout baseboard. Used as a power source for FL3 flashing light unit. (2.2amp 20VA unit)

A transformer to convert 240 volts AC to 12 volts AC , sold as spares and will require boxing in plastic /wood or used under the layout baseboard. (50VA unit)

Electronic Transformer suppling 11 volts (better than 12 volt as bulb life increased with similar light output) Deleivers 4.3 amps (enough to drive 53 grain of wheat bulbs and 140 LED lights)
The unit unlike others will drive from one LED, and has inbuilt short circuit protection.
Unit is supplied fully encased with a flying lead for mains input and flying leads for 11 volt output.

A two channel flashing light unit, ie one bulb on one off, then bulbs alturnate reverses (flash approx one per second) Unit runs 48 grain of wheat bulbs (24 on and 24 off) High amp capability (2 amps) We have found 1 unit can light 2 rides effectively.
LED's may be used (12volt transformer) capability 120 LEDs (60 on 60 off) 1 unit may light 5 rides effectively.
Requires 12 volt or 9 volt 2amp ac transformer Use TR12 or TR9 transformer listed above.

Bulbs 12 volt 65 milliamps, 'the size of a grain of wheat'
Low current drain
used on our O scale Lamps

12 volt bulbs, 65 milliamps Low current drain

12 volt bulb, 65 milliamps Low current drain

12 volt bulb, 65 milliamps Low current drain

12 volt bulb, 65 milliamps Low current drain

12 volt 65 milli amp Low current drain

Includes resistor for 12volts, of the lighthouse type and high light output to give good lighting ability.
Used on our OO sign lamps (fire station police etc) and O scale LED option lamps

High intensity red LED.Small flat LED 2.5mm x 1.5mm with a globe lens (represents light bulb or gas filament. Includes resistor to run at 12 volts.

High intensity green LED.Small flat LED 2.5mm x 1.5mm with a globe lens (represents light bulb or gas filament. Includes resistor to run at 12 volts.

High intensity orange LED.Small flat LED 2.5mm x 1.5mm with a globe lens (represents light bulb or gas filament). Includes resistor to run at 12 volts.

High intensity yellow LED.Small flat LED 2.5mm x 1.5mm with a globe lens (represents light bulb or gas filament. Includes resistor to run at 12 volts.
Used on our OO and Nscale Street lamps

High intensity blue LED.Small flat LED 2.5mm x 1.5mm with a globe lens (represents light bulb or gas filament. Includes resistor to run at 12 volts.

Small resistor suitable for our LEDs to run at 12 volts. Maximum load per resistor is 4 leds

18mm x 3mm x 3mm

6mm diameter 5 mm long. Its small size doesn't belay its strength (it will pick up 2 'D' size batteries 300g) Made from Neodymium-iron-boron, with a silver plated brass sleeve.
Advantages - will trigger reed switches from a greater distance than traditional bar magnets

Max switching current 0.5amps (capacity 10VA)
Max Voltage 220vAC
Length 18.5mm x 2.6mm